We Offer Delivery!


North Country Mercantile
Address: 2000 20th Ave. SE, Minot, ND 58701 US
Phone: | 701-838-0081

Product Catalog

  • Model Number: 2X6 & 2F6

Models 2X6 and 2F6 are built to easily handle two 1-ton bales at a time. The frame is 5″x7″ x 1/4″ wall rectangular tubing. The upper part of the frame has four outward and downward sloping arms to help prevent the frame from tearing apart over time.

  • Model Number: S-H

Take control of your small square bales and get up to 94% of hay out of every bale with the Small Bale Cinch Net! With less hay waste, you'll save both time and money. The Small Bale Cinch Net will fit 2-string bales up to 70 lbs. Use it on the ground in your pasture or stall (with non-shod horses) or throw it in a feeder to keep is off the ground and for use with shod horses.

  • Model Number: MM-H

The Cinch Net Micro Mini is the smallest of our nets and a super quick, super compact feeding solution! It attaches easily to a trailer, eye hook, fence or tree and keeps your horses busy in your pasture, paddock or while hauling, whether inside or outside your trailer. The Cinch Net Micro Mini is great for tie line usage too.

  • Model Number: L212X6H

2 1/2" (Large Stock) opening size. Hay capacity: 6' diameter round bale, 4' x 4' x 8' or 3' x 3' x 9' large square bale. Closure: cinch rope & hoggle (Handle/Toggle). Equine-quality, UV-treated DuPont fiber netting. Made in USA.

Polyethylene pipe was developed in the early 1950's by Phillip's Petroleum Company. Polyethylene is lightweight yet extremely tough and durable. It can be cold bent 20-40 times the pipes diameter. Also, for all practical purposes, is chemically inert, is not brittle, flexes, bends and absorbs impact loads over a wide range of -180 degrees F to 260 degrees F. 

Round Bale Feeder. Keep your hay clean and contained until your livestock eat it. Safe, affordable, effective.  Available in 3 sizes.

  • Manufacturer: Sioux Steel

Specifically designed for horse safety with overlapping joints & countersunk fasteners. Easy to assemble and handle. Environmentally friendly! Made of recycled materials with UV resistant resin. Lightweight! Round feeders only weigh 120 lbs. (8' in diameter). Each square panel is only 10 lbs.

  • Manufacturer: Tarter Gate

Perfect for feeding small square bales to horses in their natural feeding position. Keeps the hay dry and off the ground. Features a smooth-sided poly basket for horse safety.

Simply load the bales onto the trailer with a front end loader, or a bale spear. Drive to the desired destination. Then release the bale cradles and drop the bales off to the ground with the unique self-unloading feature. One person can do it with ease! Available in 28' 10 bale or 34' 12 bale.

One spear w/ two stabilizers. Spear sizes 39", 43" and 49".

The 3 point adapter can save you hundreds of dollars in repair expense, downtime, and unneeded abuse to your pickup when your tractor can easily pull the trailer through the snow, mud or off-road conditions.

  • Manufacturer: Trail Hand

Super tough for crowded feeding conditions. Optional bull spacing will allow feeding most large bulls.

  • Manufacturer: Stur-D

Call for availability:

 - 8' Single

 - 9' Hay Saver 

 - 14' Oval Double bale

Heavy-Duty Flails and High Speed Rotor: The 2650 features an oil bath chain case to reverse the direction of the PTO, increasing the speed and effi ciency of the rotor by 20%! Patented shredder chamber with adjustable slug bars and 3 chain slat conveyor. Combining these features with the heavy duty fl ails and high speed rotor, the 2650 shredder chamber will process bales in any condition…….wet, frozen, old, new, or with fl at bottoms. The conveyor is slanted so it helps feed the hay/straw into the rotor. The adjustable slugbar allows the operator to adjust the length of the cut, even with a bale in the chamber. Right side discharge. Tractor hydraulic controls are located on the right side, the 2650’s right hand discharge makes it easy to look over your right shoulder and keep your hand on the controls. Two stage bale loader: The 2650 speeds up the loading process by allowing each bale to be lifted separately without disturbing the other bales. The bale loader al

  • Model Number: 2655

Shredder chamber with 9 adjustable slug bars and 3 chain slat conveyor. Two stage bale loader, easily adjustable slug bars, & rotor access door. Built with very powerful inline P.T.O. driveline and an oil bath chain case which increases rotor speed.